Fire Rated Roller Shutters
Certified fire-rated roller shutters and fire curtains from E60 to EI240 — third-party tested to EN 1634-1 for warehouses, plant rooms, atriums and compartmentation lines across Ireland.
Engineered for industrial environments
Fire compartmentation is non-negotiable in industrial and commercial buildings. Our fire-rated roller shutters and fire curtains are third-party tested to EN 1634-1 and hold integrity ratings from E60 up to EI240 — meaning they hold back fire and smoke for up to four hours while radiant heat transfer stays within insulated limits.
Every system is supplied with a certified control panel, sealed battery back-up (24-hour standby / 3-minute discharge), integrated smoke detection interface and fail-safe gravity descent. That means if mains power or the fire panel fails, the shutter still closes to protect the compartment — the core requirement of TGD-B Part B and BS 7273-4 Category A.
We work directly with fire engineers, main contractors and insurers to retrofit into existing openings, coordinate cause-and-effect matrices with your fire alarm contractor, and hand over a full O&M and commissioning pack suitable for building control sign-off and insurer inspection.
Typical applications: warehouse compartment lines, atrium and mall closures, plant room protection, service lift lobbies, kitchen pass-throughs, and openings in fire-rated walls where a hinged fire door isn't practical.
Trusted across Ireland's most demanding sectors
Built to spec, delivered to schedule
Every project is engineered to site — we survey, specify and install to the exact requirements of your facility, insurance and compliance obligations.
- Certification
- EN 1634-1 · CE / UKCA marked
- Ratings
- E60 / E120 / EI60 / EI120 / EI240
- Max size
- Up to 20m wide × 8m high
- Descent
- Controlled gravity fail-safe (0.06–0.15 m/s)
- Panel
- Woven fibreglass curtain · Interlocking steel lath
- Alarm interface
- Volt-free contact · Addressable loop
- Back-up
- 24hr standby / 3-min close on power loss
- Standards
- TGD-B · BS 7273-4 Cat A · IS EN 16034
Common questions from specifiers
Preparing a tender or a maintenance schedule? Our team publishes clear answers so you can specify with confidence.
Do we need certified drawings for building control?+
Yes. Every fire-rated shutter we supply comes with third-party EN 1634-1 test evidence, CE Declaration of Performance, and a signed installer's certificate — the complete pack building control and your insurer will ask for at handover.
How often must fire shutters be serviced?+
Under Ireland's TGD-B and BS 7273-4, fire shutters must be tested and serviced at least every 6 months. Our PPM contracts include 6-monthly drop-tests, battery load-testing and full fire log book documentation.
What's the difference between a fire curtain and a fire shutter?+
Fire curtains use a woven fibreglass fabric — lightweight, compact head-box, ideal for atria and retail. Fire shutters use interlocking steel lath — heavier duty, higher insulation ratings and better for industrial compartment lines. We specify both depending on the fire strategy.
Can you retrofit into an existing opening?+
Yes. Most retrofits are done with a face-fixed head-box and side guides, requiring minimal building work. We survey, confirm the fire strategy with your engineer, then install in a single visit for standard sizes.
Do you interface with our existing fire alarm panel?+
Yes — the control panel accepts a volt-free contact from any addressable or conventional fire panel, and we commission the cause-and-effect with your fire alarm contractor as part of the handover.
Complete the specification
Loading Bay Equipment
Complete loading bay packages: dock levellers, shelters, buffers & doors for distribution and manufacturing facilities across Ireland.
Industrial Roller Door Repairs
Industrial roller door repairs across Ireland. Directly-employed engineers, all manufacturers, fast on-site response.
Planned Preventative Maintenance
Planned industrial door maintenance and servicing across Ireland — roller shutters, sectional and high speed doors. Certified inspection reports, any make.
Ready to specify your industrial door project?
Talk to our engineering team today. Free site surveys, fast quotes and nationwide response.